高温超导磁悬浮助推缩比试验系统动态测试分析

基于磁悬浮助推技术概念研究方案建立了一套悬浮加速缩比试验系统.从整体缩比模型振动试验出发,主要研究悬浮质量以及悬浮刚度对整体系统动态性能的影响,并在进行缩比单元动态试验结论的基础上,建立试验模型的加速试验动态采集系统,对整体模型进行运行性能试验.在试验基础上提出了提高磁悬浮推进系统运行稳定性的依据,并据此提出相应可行的解决方案设想.通过模型加速试验并采集试验数据定性分析磁浮系统的综合运动性能,以更好地评估系统稳定特性和品质,也为进一步研究磁悬浮助推发射的气动、分离系统稳定性和可靠性提供参考.     

H型叶栅通道流计算网格的改进

提出一种壁面正交、尾迹区网格节点分布逐渐均匀化叶栅通道网格生成方法。为了研究壁面处网格正交性对数值计算结果的影响，推导出壁面附近流动参数一阶导数离散误差与网格线交角的数学关系。采用N-S方程分别对平板紊流附面层流和叶栅通道流进行计算分析。结果表明：壁面处网格正交性对附面层内流动计算预测精度影响较大，而对势流区流动影响很小；尾迹区切向网格节点逐渐均匀化分布能更准确计算尾迹区流动。     

航空发动机涡轮前温度场数据分析方法

在航空发动机整机测试条件下,温度场测试具有局限性。介绍了1种发动机涡轮前温度场测试数据的统计分析方法,该统计方法较为有效;引入模糊原理,对统计量进行了概率分析,使得统计量评估更加完善。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

叶根间隙泄漏流对跨声压气机转子性能的影响

为研究压气机转子上游叶根轴向间隙泄漏流对转子性能的影响程度以及泄漏流与转子流场之间的相互作用机制,对带有叶根泄漏流的跨声压气机转子流场进行了数值模拟。计算时分别采用了两种模化途径,即耦合求解转子上游叶根间隙内空腔与转子通道内的流场,以及求解将叶根间隙模化为进口边界的转子流场。结果表明:叶根泄漏流可使叶根附近流动堵塞增大,造成转子气动性能的恶化。另外,叶根泄漏流的周向速度分量越大,泄漏流对转子流场的不利影响也越大。     

300M钢纯洁度磁粉检验磁痕现象的分析

采用交、直流磁粉检验并结合金相试验、电子探针试验及微量元素含量分析的方法，对３００Ｍ钢磁痕现象的本质进行了分析。结果表明，采用磁粉检验方法对航空优质钢进行纯洁度检验是可信的。     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

摄影景深控制的几个技术问题

本文论述了三种景深控制形式与艺术内容表现、艺术价值创造的关系。     

冷却剂不同流动方式对膨胀循环推力室再生冷却换热的影响

为了解液体火箭发动机膨胀循环推力室再生冷却换热特性,对某一参考发动机推力室和另外两种面积比的膨胀循环推力室建立三维计算模型,采用数值模拟的方法,考察冷却剂的温升、冷却通道压降以及推力室内壁面温度和热流密度的分布情况.重点比较了不同燃烧室圆柱段长度、冷却剂不同流动方式以及不同面积比对以上结果的影响.计算过程中采用二阶迎风格式离散控制方程.计算结果表明:采用逆流冷却时,通过加长推力室圆柱段长度使推力室受热面积增加70%后,冷却剂温升提高了一倍左右;对膨胀循环推力室进行再生冷却时,采用顺流冷却要比逆流冷却的冷却通道压降低,但同时冷却剂温升也较低,并且对喉部壁面的冷却效果较差.